The difference between single seated & double seated control valves
- Jun 18, 2019
- Hits: 1966
From the name we are able to clearly observe that the first is just one seat, and the other has a double seat, as suggested by its name may be the distinction between the valve seat. Double seat control...
How Does a Pneumatic Cylinder Actuator works
- Jun 18, 2019
- Hits: 140
Schematic of Double Acting Pneumatic Actuator: Once the air supply pressure enters the center cavity backward and forward pistons from the cylinder in the air port (2), the 2 pistons are separated and...
The Characteristics of 3 Way Ball Valve
- Jun 18, 2019
- Hits: 343
The Characteristics of 3 Way Ball Valve 1. Compact structure,quick open and shut,smooth flow path and occasional fluid resistance. 2. Good sealing performance: using four-sided valve seat material...
How does ZZYP pressure regulator works
- Jun 16, 2019
- Hits: 390
Working Principle of ZZYP Self Actuated Pressure Control Valve: 1.Self Actuated Pressure Downstream Control Valve: The self actuated downstream pressure control valve is the valve that controls the...
How Does ZZW Temperature Control Valve works
- Jun 16, 2019
- Hits: 319
Self Actuated Temperature Control Valve for Steam Hot Water Self actuated temperature control valve consists of two parts: temperature sensor and globe valve.And self operated temperature control...
PN 160 - PN 400 Flanges DIN EN 1092-1
- May 19, 2019
- Hits: 109
Dimensions of PN 160 - PN 400 Flanges DIN EN 1092-1 Dimensions in mm
PN 63 Flanges DIN EN 1092-1
- May 19, 2019
- Hits: 192
Dimensions of PN 63 Flanges DIN EN 1092-1 NOTE: Dimensions N1, N2 and N3 are measured at the intersection of the hub draft angle and the back face of the flange. Dimensions in mm * For flanges...
PN 25 Flanges DIN EN 1092-1
- May 19, 2019
- Hits: 218
Dimensions of PN 25 Flanges DIN EN 1092-1 NOTE 1: Dimensions N1, N2 and N3 are measured at the intersection of the hub draft angle and the back face of the flange. NOTE 2: For d1 dimensions see document...
PN 16 Flanges DIN EN 1092-1
- May 19, 2019
- Hits: 948
Dimensions of PN 16 Flanges DIN EN 1092-1 NOTE 1: Dimensions N1, N2 and N3 are measured at the intersection of the hub draft angle and the back face of the flange. NOTE 2: For d1 dimensions see...
PN 10 Flanges EN 1092-1
- May 19, 2019
- Hits: 365
Dimensions of PN 10 Flanges EN 1092-1 NOTE 1: Dimensions N1, N2 and N3 are measured at the intersection of the hub draft angle and the back face of the flange. NOTE 2: For d1 dimensions see document "Flange...
PN 6 Flanges DIN EN 1092-1
- May 19, 2019
- Hits: 521
Dimensions of PN 6 Flanges DIN EN 1092-1 NOTE 1: Dimensions N1, N2 and N3 are measured at the intersection of the hub draft angle and the back face of the flange. NOTE 2: For d1 dimensions see document...
PN 2.5 Flanges DIN EN 1092-1
- May 19, 2019
- Hits: 526
Dimensions of PN 2.5 Flanges DIN EN 1092-1 NOTE 1: Dimensions N1, N2 and N3 are measured at the intersection of the hub draft angle and the back face of the flange. NOTE 2: For d1 dimensions see document...